Network Video Recorder User Manual
113
6. Optional: Set Capture Quality. The captured picture will be stored to the device, high quality
brings higher resolution, but it takes larger storage space. Picture quality will not affect
detection accuracy.
7. Set the arming schedule. Refer to Configure Arming Schedule.
8. Set the linkage method. Refer to Configure Linkage Actions.
9. Click Apply.
6.6 Self-Learning
Note
The chapter is only available for certain models and event types.
6.6.1 Learn-by-Example Mode
After learn-by-example mode is enabled, the device will learn the false alarm examples in the self-
learning library. When the amount of false alarm examples in the self-learning library is large
enough, the false alarms would be significantly reduced.
You can enable learn-by-example mode in Smart Analysis → Self-Learning → Basic Settings.
6.6.2 Configure Self-Learning Library
For certain event types, when you have found false alarms in target detection of live view, you can
add them in to self-learning library to reduce the reappearances of these false alarms. You can
also delete example pictures in the library.
Before You Start
● Ensure the event supports this function.
● Ensure learn-by-example mode is enabled.
Steps
1. Find false alarms in Live View → Target, File Management → Smart Search, or the search
interfaces in Smart Analysis.
2. Click Import to Self-Learning Library.
To Next Page
Loading...
Need help?
General
