Network Video Recorder User Manual
153
user name and password accordingly.
SMTP Server
The IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port
The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS
Check to enable SSL/TLS if required by the SMTP server.
Sender
The sender's name.
Sender's Address
The sender's address.
Select Receivers
Select the receiver. Up to 3 receivers can be configured.
Receiver
The receiver's name.
Receiver's Address
The e-mail address of the user to be notified.
Enable Attached Picture
Check to send e-mail with attached alarm images. The interval is the time between sending
two subsequent alarm images.
3. Click Apply.
4. Optional: Click Test to send a test email.
12.6 Configure Port
You can configure different types of ports to enable relevant functions.
Steps
1. Go to System → Network → Advanced → More Settings.
To Next Page
Loading...
Need help?
General
