Network Video Recorder User Manual
124
12) Click Draw Region and draw a quadrilateral in the preview window by specifying four
vertexes of the detection region.
Step 7 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 8 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 9 Click Apply.
12.7 Unattended Baggage Detection
Purpose:
Unattended baggage detection function detects the objects left over in the pre-defined region such
as the baggage, purse, dangerous materials, etc., and a series of actions can be taken when the
alarm is triggered.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Unattended Baggage.
Figure 12-8 Unattended Baggage Detection
Step 3 Select a Camera to configure.
Step 4 Check Enable Unattended Baggage Detection.
Step 5 Optionally, check Save VCA Picture to save the captured pictures of unattended baggage
detection.
Step 6 Follow the steps to set the detection rules and detection areas.
To Next Page
Loading...
