Network Video Recorder User Manual
134
Check Enable DHCP to obtain IP settings automatically if a DHCP server is available in the
network.
Valid range of MTU value is 500 to 9676.
Step 4 Click Apply.
14.2 Configure Guarding Vision
Purpose
Guarding Vision enables the mobile phone application and the service platform page
(dev.guardingvision.com) to access and manage your connected NVR, providing a convenient
remote access to the surveillance system.
Step 1 Go to System > Network > Advanced > Platform Access.
Figure 14-2 Guarding Vision Settings
Step 2 Check Enable and a Service Terms window will pop up. Create your verification code, check to
agree to the service terms and click OK.
Step 3 (Optional) Check Custom and enter the server address as needed. The default server address is
dev.guardingvision.com.
Step 4 (Optional) Check Enable Stream Encryption and verification code will be required for remote
access and live view.
Step 5 Click Apply.
After configuration, you can access and manage your devices through Guarding Vision app or
dev.guardingvision.com.
To Next Page
Loading...
