HIKVISION DS-A81 Series - 3.5 Control Message

DS-A83 Series ICVS Quick Start Guide
23
Chapter 6 Network Configuration
Purpose:
Configure network after login.
Step 1 Go to Device.
Step 2 Click Information Overview.
Step 3 Click Modify Network.
Figure 6-1 Modify Network
Step 4 Click Settings of a bound port.
 Port Name: Not editable.
 Jumbo Frame Size: Default value is 1500. Default value is recommended.
 Select Mode: Seven bound mode is selectable. Default mode is balance-alb.