Quick Operation Guide of DS-A81 Series Storage System
70
R/W IP: Input the IP address of the DVR to which the DVR NAS disk is to be connected.
Number: Input the number of the DVR NAS disks to be created. (The default value is 1.)
Available physical volume: Select the physical volume on which the DVR NAS disk(s) is
located.
The size of the DVR NAS disk should be set between 20GB and 8TB.
If you specify the R/W IP, only the device with the specified IP address can access the DVR
NAS disk. If you leave the field empty, then multiple devices can access the DVR NAS disk.
The DVR NAS disk cannot be used by two DVRs at the same time.
Figure 9. 3 Create DVR
3. Click the OK button to create the DVR NAS disk. You can view the information of the added
DVR NAS disks on the DVR NAS disk List.
Figure 9. 4 DVR NAS Disk List
4. You can select a DVR NAS disk and click Operation in the Modify column to modify the name
and R/W IP address for the DVR NAS disk. Click OK to confirm the settings.