LCD Monitor User Manual
16
When the device is restarted or the signal input is changed, the VGA parameters cannot be
automatically adjusted.
VGA Parameters Figure 4-3
Press MENU again to complete the settings and back to the main menu interface. Step 4
Aspect Settings 4.2.3
The aspect ratio refers to the proportions of the height and width of an image.
On the main menu, press the directional keys on the remote control to select the Aspect. Step 1
Press OK to enter the Aspect settings interface. Step 2
Press ◄ or ► to set the aspect ratio to 16:9, 4:3, P-to-P. Step 3
Aspect Settings Figure 4-4
Press MENU again to complete the settings and back to the main menu interface. Step 4
To Next Page
Loading...
