LCD Monitor User Manual
20
Auto: automatically turns on the fan when the device reaches the defined temperature
(refer to step 3).
In the auto fan mode, set the temperature for automatically starting the fan. Step 3
Press MENU again to complete the settings and back to the main menu interface. Step 4
Temperature Monitor Figure 4-9
Configuring Alarm Mode 4.3.5
You can set the overheat alarm prompt on the screen and once the board temperature is too high.
Select Alarm Mode and press OK. Step 1
Press ◄or ► to set the Overheat Alarm mode to On. Step 2
Set the temperature for triggering the alarm prompt on the screen. Step 3
Press MENU again to complete the settings and back to the main menu interface. Step 4
System Information Figure 4-10
System Maintenance 4.4
Upgrading the Device 4.4.1
Before you start
To Next Page
Loading...
