LCD Monitor User Manual
5
2.1.3. DS-D5065UC
1 2 3 4 5 6 7 8
MUTE INPUT
MENU
9
SN Button Description
1
[ ]
button
Turn on or turn off the display.
2
[MUTE] button
Switch the mute ON/OFF.
3
[INPUT] button
Choose the input source.
4
[ ] button
When the OSD menu is on, this button increases the adjustment value.
5
[ ] button
When the OSD menu is on, this button decreases the adjustment value.
6
[ ] button
When the OSD menu is on, scroll up the menu to adjust the selected item.
7
[ ] button
When the OSD menu is on, scroll down the menu to adjust the selected item.
8
[MENU] button
Return to previous menu while OSD menu is on, or to activate the OSD menu when OSD
menu is off.
9
Remote sensor and
power indicator
• Use them to receive the command signal from the remote control. (Please pull out the
lens for better reception.)
• Power indicator. The light is red during standby. The light is green after booting. The
lightashesredwhenoperatingthecontroller.