1:1 Matching Threshold
Set the matching threshold when authencang via 1:1 matching mode. The larger the value,
the smaller the false accept rate and the larger the false
rejecon rate.
Note
You are recommended to retain the default value. The adjustment will aect the face
misidencaon rate and rejecon rate.
1:N Matching Threshold
Set the matching threshold when authencang via 1:N matching mode. The larger the value,
the smaller the false accept rate and the larger the false
rejecon rate.
Note
You are recommended to retain the default value. The adjustment will aect the face
misidencaon rate and rejecon rate.
Face Recognion Timeout Value
Set the meout value when face recognizing. If the face recognion me is longer than the
congured value, the system will pop up a prompt.
ECO Mode
Aer enabling the ECO mode, the device will use the IR camera to authencate faces in the low
light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO
mode (1:1).
Note
Aer enabling ECO mode, the face will be recognized in weak light or no light environment.
Aer disabling ECO mode, face recognion eect will decline in weak light or no light
environment.
ECO Mode Threshold
The larger the value, the device enter the ECO Mode easier.
ECO Mode (1:1)
Set the matching threshold when authencang via ECO mode 1:1 matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate.
ECO Mode (1:N)
Set the matching threshold when
authencang via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate
Face with Mask Detecon
Aer enabling the face with mask detecon, the system will recognize the captured face with
mask picture or not. You can set face with mask1:N matching threshold, it's ECO mode, and the
strategy.
DS-K1T673 Series Face Recognion Terminal User Manual
117
To Next Page
Loading...
Need help?
General
