HIKVISION DS-K1T673 Series - Chapter 3 Installation; Installation Environment and Mounting

Chapter 3 Installaon
3.1 Installaon Environment
●
Avoid backlight, direct sunlight, and indirect sunlight.
●
For
beer recognion, there should be light source in or near the installaon environment.
●
If you have to install the device outdoors, you should install a
protecve shield (oponal) for the
device.
Note
For details about installaon environment, see Tips for Installaon Environment.
3.2 Flush Mounng with Gang Box
Before You Start
Remove the back sheet of the device.
Steps
1.
Make sure the gang box is installed on the wall.
Note
Gang box is not supplied.
DS-K1T673 Series Face Recognion Terminal User Manual
6