HIKVISION DS-K1T673 Series User Manual

Note
You can import the exported device parameters to another device.
Import
Click and select the le to import. Click Import to start import conguraon le.
Click Advanced Sengs, and enter the admin password.
Face Parameter
Custom An-Spoong Detecon
An-Spoong Detecon Threshold
The larger the value, the smaller the false accept rate and the larger the false rejecon
rate. The smaller the value, the larger the false accept rate and the smaller the false
rejecon rate.
An-Spoong Detecon Threshold of Face with Mask
The larger the value, the smaller the false accept rate and the larger the false rejecon
rate when the detected face is with a mask. The smaller the value, the larger the false
accept rate and the smaller the false rejecon rate when the detected face is with a mask.
Lock Face for An-Spoong Protecon
Aer enabling this funcon, the device will lock automacally when an-spoong detecon
failed.
Lock Duraon
The lock duraon aer enabling Lock Face for An-Spoong Protecon when an-spoong
detecon failed.
Unlock
You can click Unlock according to your needs.
Version Informaon
You can view the device informaon.
9.5.20 Device Debugging
You can set device debugging parameters.
Steps
1.
Click Maintenance and Security → Maintenance → Device Debugging .
2.
You can set the following parameters.
Enable SSH
To raise network security, disable SSH service. The
conguraon is only used to debug the
device for the professionals.
Print Log
DS-K1T673 Series Face Recognion Terminal User Manual
123

HIKVISION DS-K1T673 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T673 Series
Category	Touch terminals
Language	English