Fingerprint Access Control Terminal·User Manual
1
Chapter 1 Overview
1.1 Introduction
DS-K1T803 Series and DS-K1T804 Series Fingerprint Access Control
Terminal is designed with a 2.4-inch LCD display screen. Offline
operation, wired network (TCP/IP) and wireless network
transmission modes are supported as well. (The models with -1 do
not support the wireless network function.)
Note: The figure on the left is for reference only. Refer to the
actual product as the standard.
1.2 Main Features
1.2.1 DS-K1T803F/MF/EF/MF(L) and DS-K1T804F/MF/EF Features
Doorbell ringtone settings function
2.4-inch LCD display screen
Transmission modes of wired network (TCP/IP) and wireless network
Max. 3,000 users, 3,000 fingerprints and 100,000 access control events storage
Export the report and upgrade the device via the USB disk.
Adopts the optical fingerprint module, supporting 1:N mode (fingerprint, card + fingerprint)
and 1:1 mode (card + fingerprint) (DS-K1T803F and DS-K1T804F does not support swiping
card.)
Multiple authentication modes: card, fingerprint, card + fingerprint, card + password,
fingerprint + password, card + fingerprint + password, terminal authentication, user
authentication and so on. (DS-K1T803F and DS-K1T804F does not support swiping card.)
EM card reading (DS-K1T803EF/DS-K1T804EF)
Mifare card reading, including card No. reading (DS-K1T803MF/DS-K1T804MF)
CPU card reading, including CPU card serial No
Secure door control unit accessing via RS-485 connection
To Next Page
Loading...
