DS-K2600 Series Access Controller
40
Figure 1-4 List Selecting Interface
4. Click the Activate button to pop up the Activation interface.
5. In the pop-up window, create a password in the password field, and confirm the
password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you reset
your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Figure 1-5 Password Interface
6. Click OK button to activate.
7. Click the Modify Netinfor button to pop up the Network Parameter Modification
interface.
8. Change the device IP address to the same network segment with your computer by
either modifying the IP address manually.
9. Input the password and click the OK button to save the settings.
To Next Page
Loading...
