HIKVISION DS-K3G4402 Series User Manual

Tri-pod Turnstile • User Manual
12
2.3 Connection
1) Connecting AC100~220V power input
2)Connect wire of access control device
NO COM NO COM
2.4 Debugging instruction
1) The test preparation
Such as the installation , we have completed connection of the circuit drive in the plate, and
provide 220 V for turnstile, control PCB board connected to thecomputer (control PCB board is
external equipment of turnstile , not turnstile inside parts).
2) Check the wiring
When connected power debugging, please check the wiring diagram according to each parts
of the line is connected,
·
Open signal of access
Control board
Control board

HIKVISION DS-K3G4402 Series Specifications

General

Brand	HIKVISION
Model	DS-K3G4402 Series
Category	Turnstiles
Language	English