HIKVISION DS-KD8023-E6 - Page 51

Figure 6-6 SNMP Sengs
2.
Check the checkbox of Enable SNMPv1, Enable SNMP v2c, Enable SNMPv3 to
enable the feature correspondingly.
3.
Congure the SNMP sengs.
4.
Click Save to enable the
sengs.
Note
To lower the risk of informaon leakage, you are suggested to enable SNMP v3
instead of SNMP v1 or v2.
FTP Sengs
Video Intercom D Series Door Staon User Manual
38