HIKVISION DS-PDCL12-EG2-WB - Page 3

2. Install the Detector
Note: The addional force shall be equal to three mes the weight of the equipment but not less than 50N. The equipment
and its associated mounng means shall remain secure during the installaon. Aer the installaon, the equipment,
including any associated mounng plate, shall not be damaged.
with Screws
Secure the rear panel on the wall with four screws.
with the Sponge Tape
Paste the device on the wall with sponge tape.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
3
Note: Installing with sponge tape is non EN compliant.