96
Control Panel Options
Option Management
Set the authority options.
Click Configuration → System → Control Panel Option → Option Management to enter the page.
Figure 5-24. Option Management
Panel Sound Prompt
Enable/Disable sound prompt. Set the sound volume and trigger events.
Panel LED Display
Enable/Disable panel functional LED.
Audible Tamper Alarm
While enabled, the system will alert with buzzer for the tamper alarm. Regardless of whether
it is enabled or not, the tamper alarm will be normally pushed to Cloud (for APP) and ARC.
Bypass on Re-Arm
While enabled, the bypassed zone will back to arm if fault restored.
Jamming Sensitivity Settings
The device will detect RF interference and push messages when the RF interference
interferes with communication. You can adjust the detection sensitivity.
Motion Detector Restore
Motion detectors include all PIR detectors.
-Disable: No automatic restore.
-Immediate After Alarm: Motion detectors automatically restores immediately after the
alarm and reports to Cloud (for APP) and ARC.
To Next Page
Loading...
Need help?
General
