EasyManua.ls Logo

HIKVISION DS-TDSB00-EKT - Chapter 1 Product Introduction; Introduction; Key Feature; Specification

HIKVISION DS-TDSB00-EKT
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fall Detection Radar User Manual
1
Chapter 1 Product Introduction
Introduction
Based on the 60 GHz frequency band, fall detection radar (hereinafter referred to as “device”)
adopts FMCW, MIMO, beamforming, deep learning, and other technologies. It can obtain target
information, including person location, speed, posture, etc., and can provide non-contact and non-
privacy fall detection.
Key Feature
No privacy disclosure.
High detection accuracy and low false alarm rate.
Target tracking.
Remote and non-contact posture detection.
Small size, light, and easy installation.
Specification
Refer to the table below for the device specification.
DS-TDSB00-EKT/4m Fall Detection Radar Specification
Parameters
Values
Working Frequency
60 to 64 GHz
Modulation Wave
FMCW
Frequency Span
2 GHz
Horizontal FoV
-45° to +45°
Vertical FoV
-45° to +45°
Range Resolution
0.08 m
Detection Range
0.1 to 6 m
Speed Resolution
0.10 m/s
Data Cycle
70 ms
Communication Interface
RS-485/Wi-Fi
Working Voltage
9 to 12 VDC
Working Electric Current
≤ 200 mA @ 12 VDC

Other manuals for HIKVISION DS-TDSB00-EKT

Related product manuals