Network Video Recorder User Manual
50
Figure 6-12 Add IP Camera
3. Enter network camera parameters.
Use Camera Activation Password
If it is enabled, the video recorder will add the camera by the set channel default password.
4. Click Add.
Add Network Camera on Different Network Segment
If your network camera is on a different network segment, the device can search its IP address
within a range of IP addresses, and add it.
Before You Start
● Ensure the network connection is valid and correct.
● Ensure the network camera password is the same as your video recorder.
Steps
1. Go to Configuration → Camera → Camera → IP Channel.
To Next Page
Loading...
Need help?
General
