HIKVISION HiLook User Manual

Network PTZ Camera·Quick Start Guide
11
1) Al i gn the camera with the installation plate on the pendant
mounting bracket, and rotate the camera clockwise to fix the
camera on the i nstallation plate.
2) Remove the protective films after installation.
Note:
Do not touch the bubble directly with your hands. Otherwise,
the image may blur.
4. You can loosen the screws on the pendant mounting bracket
and adjust the horizontal direction of the camera. Tighten the
screws after direction adjustment.

HIKVISION HiLook Specifications

General

Image Sensor	1/2.7" Progressive Scan CMOS
Ingress Protection	IP67
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Resolution	1920 × 1080
IR Range	Up to 30 m
Power Supply	DC 12V ±25% / PoE (varies by model)
Weather Resistance	Yes
Lens	2.8mm fixed lens (varies by model)