HIKVISION HWN-4216MH - 2.2.5 Customize Pattern

Steps
1.
Preview a camera in live view and click on shortcut menu.
2.
Click Patrol.
3.
Select a desired patrol.
4.
Click Set.
5.
Click
.
6.
Congure key point parameters, such as the key point No., duraon of staying for one key point
and speed of patrol. The key point is corresponding to the preset. The preset number
determines the order at which the PTZ will follow while cycling through the patrol.
Duraon
refers to the me span to stay at the corresponding key point. Speed denes the speed at which
the PTZ will move from one key point to the next.
Figure 2-5 Patrol Sengs
7.
Click Apply.
What to do next
Select a patrol and click Call to call it. The PTZ camera will move according the predened patrol
path.
Figure 2-6 Call Preset
2.2.5 Customize Paern
A paern records the movement path and dwell me in a certain posion. When you call a
paern, the PTZ camera will move according to the recorded path.
Steps
1.
Preview a camera in live view and click on shortcut menu.
2.
Click
Paern.
Network Video Recorder User Manual
11