HIKVISION HWN-4216MH - 6.5.2 Perimeter Protection

6.5 Event Conguraon
6.5.1 Normal Event
Moon Detecon
Moon detecon enables the video recorder to detect the moving objects in the monitored area
and trigger alarms.
Steps
1.
Go to
Conguraon → Camera → Moon Detecon .
2.
Select a camera.
3.
Check Enable.
4.
Set the
moon detecon area.
-
Click Draw Area or Clear to draw or clear areas. The
rst area is set as full screen by default.
-
Click Full Screen to set the moon detecon area as full screen. You can drag on the preview
window to draw
moon detecon areas.
5.
Adjust Sensivity. Sensivity allows you to calibrate how readily movement triggers the alarm. A
higher value results in the more readily to triggers moon detecon.
6.
Set analysis mode as AI or PIR.
AI
The moon detecon event will be analyzed by your device.
PIR
The
moon detecon event will be analyzed by certain analog PIR cameras.
7.
Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
8.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
9.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
10.
Click Apply.
Video Tampering
Trigger alarm when the lens is covered and take alarm response acons.
Steps
1.
Go to Conguraon → Event → Normal Event → Video Tampering .
Network Video Recorder User Manual
60