HIKVISION HWN-4216MH - Display Settings

Import/Export IP Camera Conguraon File
The informaon of added network camera can be generated into an excel le and exported to the
local device for backup, including the IP address, manage port, password of admin, etc. And the
exported
le can be edited on your computer, like adding or deleng the content, and copy the
seng to other devices by imporng the excel le to it.
Before You Start
Connect a backup device like USB
ash drive to your video recorder.
Steps
1.
Go to Conguraon → Camera → IP Camera .
2.
Click
3.
Click Export to export conguraon les to the connected backup device.
4.
To import a conguraon le, select the le from the selected backup device and click Import.
Aer the imporng process is completed, you must reboot the video recorder.
Advanced
Sengs
Steps
1.
Go to Conguraon → Camera → IP Camera .
2.
Click
.
3.
Congure the parameters as your desire.
H.265 Auto Switch Conguraon
If you enable the opon, video recorder will automacally switch to H.265 stream for the
network camera (which supports H.265 video format) for the inial access.
Upgrade
Upgrade the added network cameras.
Channel Default Password Management
Change the default password of acvang and adding network camera.
6.3.2 Display
Sengs
Congure the OSD (On-Screen Display), image sengs, exposure sengs, day/night switch
sengs, etc.
Steps
1.
Go to Conguraon → Camera → Display .
2.
Select Camera.
3.
Congure parameters as your desire.
OSD
Sengs
Network Video Recorder User Manual
56