HIKVISION HWN-4216MH - 6.4 Device Management; 6.4.1 Switch

Congure Advanced Camera Parameters
You can congure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network
connecon is valid and correct.
Steps
1.
Go to Conguraon → Camera → Camera .
2.
Click
.
3.
Set camera parameters like IP address, camera password, etc.
4.
Click Apply.
Congure
Channel Type
You can disable a PoE channel to addionally increase a normal IP channel resource.
Go to
Conguraon → Camera → Camera → PoE Binding Conguraon , and set the PoE channel
as your desire.
Figure 6-12 PoE Binding Conguraon
Sort Channel Order
Go to Conguraon → Camera → Camera . Refer to Sort Channel Order for details.
Congure
Remote Sengs
Go to Conguraon → Camera → Camera . Refer to Congure Remote Sengs for details.
Network Video Recorder User Manual
55