HIKVISION iDS-2CD7A G0-IZH Series User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 41
Figure 6-2 Set Rules
4. Optional: You can set the parameters of multiple areas by repeating the above steps.
Set Video Tampering Alarm
When the configured area is covered and cannot be monitored normally, the alarm is triggered and the
device takes certain alarm response actions.
Steps
1. Go to Configuration → Event → Basic Event → Video Tampering.
2. Check Enable.
3. Set the Sensitivity. The higher the value is, the easier to detect the area covering.
4. Click Draw Area and drag the mouse in the live view to draw the area.
• Stop Drawing: Finish drawing.
• Clear All: Delete all the drawn areas.

HIKVISION iDS-2CD7A G0-IZH Series Specifications

General

Brand	HIKVISION
Model	iDS-2CD7A G0-IZH Series
Category	Security Camera
Language	English