HIKVISION iDS-96000NXI-I16/24 User Manual

Comparison Failed Prompt
It will display the prompt in live view Target (with Facial Detecon checked) or Facial
Recognion when face picture comparison failed. You can click in live view to enter Facial
Recognion interface.
Comparison Succeeded Prompt
It will display the prompt in Facial Recognion when face picture comparison succeeded. You
can click
in live view to enter Facial Recognion interface.
Enable Alarm Output Pulse
It is usually linked with a gate. When a person is passing a gate, if the comparison succeeded,
it will trigger a pulse to open the gate. The pulse is between 100 to 900 ms. You can set Alarm
Output Pulse (ms) in System → Event → Normal Event → Alarm Output .
9. Select face picture libraries and set similarity.
10. Set the arming schedule. Refer to
Congure Arming Schedule .
11. Set the linkage
acons when face picture comparison succeeded or failed. Refer to Congure
Linkage Acons .
12.
Oponal: Congure face grading parameters. Refer to Face Grading Conguraon .
13. Click Apply to save the
sengs.
Congure
Stranger Alarm
Compare detected face pictures with specied face picture library. Trigger alarm when comparison
failed.
Steps
1. Go to Smart Analysis → Smart Event
Sengs → Facial Recognion .
2. Select a camera.
3. Click Face Picture Comparison.
Network Video Recorder User Manual
87

HIKVISION iDS-96000NXI-I16/24 Specifications

General

Brand	HIKVISION
Model	iDS-96000NXI-I16/24
Category	Network Hardware
Language	English