HIKVISION iDS-96000NXI-I16/24 User Manual

Note
Up to 4 areas are selectable.
2) Click Draw Area to draw a quadrilateral in the preview window by specifying four verces of
the area.
3) Set Percentage.
Percentage
The density of human bodies within the area. If it exceeds the threshold value, the device
will trigger alarm.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set the linkage
acons. Refer to Congure Linkage Acons .
9. Click Apply.
6.2.6 Fast Moving
Detecon
Fast moving detecon is used to detect suspicious running and chasing, over-speed, and fast
moving. It will trigger alarm when an object is moving fast and send nocaon to arming host so
that necessary acons can be taken in advance.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Fast Moving.
Figure 6-6 Fast Moving Detecon
4. Check Enable Fast Moving.
5. Oponal: Check Save VCA Picture to save the captured fast moving detecon pictures.
6. Set fast moving
detecon parameters.
1) Select Arming Region. Up to 4 regions are selectable.
Network Video Recorder User Manual
66

HIKVISION iDS-96000NXI-I16/24 Specifications

General

Brand	HIKVISION
Model	iDS-96000NXI-I16/24
Category	Network Hardware
Language	English