HIKVISION IDS-TCV900-BI User Manual

Network Traffic Camera • User Manual
28
(Optional) you can also check Synchronize with PC. The device time is synchronized with
the time of your computer.
Click Save to save the settings.
 NTP Synchronization
Select Synchronization Mode as NTP Synchronization.
NTP Synchronization
Set the following settings:
 Server Address: IP address of NTP server.
 NTP Port: Port of NTP server.
 Interval: The time interval between the two synchronizing actions with NTP server.
If the device is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the device is set in a customized network, NTP software can be used to establish
a NTP server for time synchronization.
Click Save to save the settings.
Configuring DST (Daylight Saving Time)
Go to Configuration > Device Configuration > System Configuration > DST.
Check Enable DST.
Set Start Time, End Time, and DST Bias.
Click Save to save the settings.

HIKVISION IDS-TCV900-BI Specifications

General

Brand	HIKVISION
Model	IDS-TCV900-BI
Category	Security Camera
Language	English