Network Traffic Camera • User Manual
30
Chapter 7 Encoding and Storage Configuration
Purpose:
You can set the encoding and storage related parameters from this page, including video encoding,
image encoding, ROI, record schedule, redundant storage, FTP, and cloud storage.
Set Video Encoding
For certain device models, you can set parameters for available video streams, for example, the
main stream, the sub-stream, etc. And you can also customize additional video streams for further
needs.
On Video page, set-up available video streams.
On Custom Video page, add extra video streams
Go to Configuration > Device Configuration > Encoding and Storage> Video Encoding.
Video Settings
Select the Stream Type. Supported stream types are listed in the drop-down list.