HIKVISION IDS-TCV900-BI - Chapter 10 Image Parameters Configuration; Set Dual-Shutter Parameters

Network Traffic Camera • User Manual
54
Chapter 10 Image Parameters Configuration
Purpose:
Set double shutter parameters, general parameters, video parameters, and ICR on this page.
Set Dual-Shutter Parameters
Go to Configuration > Device Configuration > Image Parameters > Double Shutter
Parameter.
Dual-Shutter Parameters Configuration
Check Enable Dual-Shutter, to guarantee preview quality and algorithm analysis.
Select Encoding Type. Video Stream and Recording Stream are selectable.
 Video Stream: Video Stream is transferred for video previewing.
 Recording Stream: Recording Stream is transferred for video recording.
If you select recording stream, set record parameters. Go to Configuration > Device
Configuration > Image Parameters > Record, set Brightness, Contrast, Shutter Speed and Gain.
Click Save to save the settings.