To Next PageTo Next PageWhy is the Hiland FT-235 Patio Heater burner flame is low?
A low burner flame on your Hiland Patio Heater can be due to several reasons. Low gas pressure is a common cause; turn the cylinder valve OFF and replace the cylinder. If the outdoor temperature is below 40ºF and the tank is less than 1/4 full, use a full cylinder. Also, inspect the burner and orifices for any blockages.
What to do if my Hiland Patio Heater pilot won’t light?
If the pilot light on your Hiland Patio Heater won't ignite, it could be due to a few reasons. There might be air in the gas line; open the gas line and bleed it (pressing control knob in) for no more than 1 - 2 minutes or until you smell gas. If the gas pressure is low with the cylinder valve fully open, turn the cylinder valve OFF and replace the cylinder. You can also try using a match to light the pilot, and consider obtaining a new igniter.
What to do if my Hiland FT-235 burner won’t light?
If the burner won't light, it could be due to several reasons. First, the propane cylinder might be frosted over; wait until it warms up. Second, there might be a blockage in the orifice; clear any blockage. Third, the control knob might not be in the ON position; turn it to ON.
What to do if the pilot won’t stay lit on my Hiland Patio Heater?
If the pilot light won't stay lit, the issue could be due to: * Dirt built up around the pilot: Clean the dirt from around the pilot. * A loose connection between the gas valve and pilot assembly: Tighten the connection and perform a leak check. * A faulty thermocouple: Replace the thermocouple.
How to stop carbon build-up and thick black smoke from Hiland Patio Heater?
If you're seeing carbon build-up or thick black smoke from your Hiland Patio Heater, it's likely due to dirt or film on the reflector and burner screen, so clean them. Another cause could be a blockage in the burner; remove any blockage and clean the burner inside and outside.
How to fix carbon build-up and black smoke in Hiland Outdoor Fireplace?
Carbon build-up and thick black smoke in your Hiland Outdoor Fireplace may be caused by: * Dirt or film on the burner: Clean the burner. * A blockage in the burner: Remove any blockage and thoroughly clean the burner, both inside and out.
What to do if the igniter fails on my Hiland FT-235 Patio Heater?
If the igniter fails, use a match to light the pilot. Obtain a new igniter and replace the old one.
What to do if there is low gas pressure with a fully open cylinder valve on my Hiland FT-235 Patio Heater?
If you have low gas pressure even with the cylinder valve fully open, turn the cylinder valve OFF and replace the cylinder.
What to do if my Hiland FT-235 Patio Heater burner won't light?
If the burner on your Hiland Patio Heater isn't lighting, there are a few things to check. First, if the propane cylinder is frosted over, wait for it to warm up. Also, check for any blockages in the orifice and clear them. Finally, make sure the control knob is turned to the ON position.
Why won't the burner light on my Hiland FT-235?
If the burner on your Hiland Patio Heater won't light, it could be due to a frosted propane cylinder; wait until the propane cylinder warms up and becomes unfrosted. Also, check for any blockage and clear it. Ensure that the control knob is turned to the ON position.
This document describes the Hiland Premium Series Wood Burning Firepit with Cooking Grill, Model # FT-235 (Product Name: Fire pit YFP-235). It serves as an assembly instruction and owner's manual, providing details on the product's function, technical specifications, usage, and maintenance.
The Hiland Wood Burning Firepit with Cooking Grill is designed for outdoor use, primarily for burning wood logs to create a fire and for cooking. It features a fire bowl to contain the fire, a cooking grill for preparing food, and a mesh cover to enhance safety by containing sparks. A poker is included for managing the fire. The firepit is intended to provide warmth and ambiance in an outdoor setting, while also offering the convenience of a cooking surface.
The firepit is identified by Model # FT-235 and Product Name YFP-235. The assembly requires M6*10mm Bolts (AA) and M6 Nuts (BB). A screwdriver is needed for assembly. The parts list includes:
The firepit is designed for outdoor use only and is intended for burning wood logs exclusively. It explicitly warns against burning coal, leaves, or other combustible materials in the bowl.
The manual emphasizes the importance of proper maintenance to ensure product longevity and warranty validity.
The product comes with a One-Year Limited Warranty provided by AZ Patio Heater, LLC.
For questions, problems, or missing parts, customers in the USA can call 1-888-775-1330 for assistance from 8 a.m. to 4 p.m. MST, Monday to Friday. For damaged products, return to the retailer may be necessary. For warranty service, contact warranty@azpatioheaters.com or call toll-free at 888-775-1330. Customers in Canada should only return the product to the store if purchased within 90 days. For problems after 90 days, call 1-888-775-1330. Dated proof of purchase is required for warranty service. The product is distributed by AZ Patio Heaters, LLC.
General| Brand | Hiland |
|---|---|
| Model | FT-235 |
| Category | Patio Heater |
| Language | English |
