Why Procedural Stretcher—Auto Contour™ Feature or BackSaver Fowler® Feature Does Not Raise or Lower Correctly in Hill-Rom P8050?
If the Procedural Stretcher's Auto Contour™ Feature or BackSaver Fowler® Feature does not raise or lower correctly on your Hill-Rom medical equipment, replace the cables as necessary. Alternatively, adjust the cables or replace the head-end gas cylinder as needed.
What to do if the Hill-Rom Medical Equipment stretcher will not lower?
If your Hill-Rom medical equipment stretcher will not lower, you can try to adjust the release mechanism. If that doesn't work, you may need to replace the hydraulic cylinder at either the head or foot end of the stretcher.
Why is there reduced braking ability in my Hill-Rom P8050?
To address reduced braking ability in your Hill-Rom medical equipment, ensure the brake/steer link adjustment at both ends of the stretcher is correct. If necessary, adjust the brake/steer link. If the issue persists, adjust the caster brake shoes or replace any defective casters.
What to do if the weight shown on the Hill-Rom P8050 Medical Equipment scale display is not correct?
If the weight shown on the Hill-Rom medical equipment scale display is not correct, ensure all packing materials and shims have been removed before taking a weight reading. Also, verify that the load beam cables are connected in the correct order before taking another reading.
What to do if the Hill-Rom Medical Equipment stretcher will not go into neutral position?
If your Hill-Rom medical equipment stretcher will not go into neutral position, check the brake/steer link at the head and foot ends of the stretcher for correct orientation, and adjust if necessary. Also, inspect each caster and replace any that are defective. You may also need to tighten the brake/steer link screw.
Why Electric Stretcher—Knee Section Does Not Raise or Lower Electrically in Hill-Rom P8050 Medical Equipment?
If the Electric Stretcher knee section on your Hill-Rom medical equipment does not raise or lower electrically, unplug the stretcher from its power source, put on an antistatic strap, and then connect the plugs firmly into position.
What causes OB/GYN Stretcher—Foot Supports Malfunction in Hill-Rom P8050 Medical Equipment?
If the OB/GYN Stretcher foot supports on your Hill-Rom medical equipment malfunction, replace any missing hardware. If the problem continues, replace the defective foot support gas spring or the defective foot support Mechlok®1 device.
Why Electric Stretcher—Back Section Does Not Raise or Lower Electrically in Hill-Rom P8050?
If the Electric Stretcher back section on your Hill-Rom medical equipment does not raise or lower electrically, unplug the stretcher from its power source, put on an antistatic strap, and then connect the plugs firmly into position.
Why Procedural, Transport, Trauma, or OB/GYN Stretcher—Back Section Does Not Raise or Lower Correctly in Hill-Rom Medical Equipment?
If the Procedural, Transport, Trauma, or OB/GYN Stretcher back section on your Hill-Rom medical equipment does not raise or lower correctly, replace any missing hardware. If the issue continues, replace the defective back section gas spring.
Why the Steering Plus™ Steering System Does Not Operate Correctly in Hill-Rom P8050 Medical Equipment?
If the Steering Plus™ Steering System on your Hill-Rom medical equipment does not operate correctly, examine the fifth wheel pivot arms and pivot bracket for correct assembly. If problems persist, remove the Steering Plus™ Steering System assembly and replace any damaged or inoperative parts, or replace the fifth wheel.
Provides crucial safety guidelines for operation and maintenance.
Lists common scale display errors and their corresponding solutions.
Details procedures to verify the correct operation of various stretcher functions.
Covers specific function checks for the Procedural Stretcher model.
Details function checks specific to the Electric Stretcher model.
Troubleshooting steps for issues with reduced stretcher braking performance.
Provides guidance for diagnosing and resolving issues where the stretcher will not lower.
Troubleshooting steps for when the stretcher scale display is not functioning.
Provides steps for removing and replacing the siderail on specific stretcher models.
Details the procedure for removing and replacing the siderail on the electric stretcher.
Provides instructions for removing and replacing the control board in the electric stretcher.
Details the procedure for removing and replacing the scale load beam.
Explains the removal, replacement, and adjustment of the active brake system.
General| Brand | Hill-Rom |
|---|---|
| Model | P8050 |
| Category | Medical Equipment |
| Language | English |
To Next Page