Why Procedural, Transport, Trauma, or OB/GYN Stretcher—Back Section Does Not Raise or Lower Correctly in Hill-Rom Medical Equipment?
If the Procedural, Transport, Trauma, or OB/GYN Stretcher back section on your Hill-Rom medical equipment does not raise or lower correctly, replace any missing hardware. If the issue continues, replace the defective back section gas spring.
What to do if the weight shown on the Hill-Rom P8050 scale display is flashing?
To resolve the issue of a Hill-Rom medical equipment scale display showing a flashing weight, calibrate the scale. If the problem persists, replace the scale P.C. board.
Why the Steering Plus™ Steering System Does Not Operate Correctly in Hill-Rom P8050 Medical Equipment?
If the Steering Plus™ Steering System on your Hill-Rom medical equipment does not operate correctly, examine the fifth wheel pivot arms and pivot bracket for correct assembly. If problems persist, remove the Steering Plus™ Steering System assembly and replace any damaged or inoperative parts, or replace the fifth wheel.
What to do if the siderail on Hill-Rom P8050 does not operate correctly?
If the siderail on your Hill-Rom medical equipment does not operate correctly, check for any obstructions and remove them. If the problem continues, consider replacing the latch.
What causes loss of corner steer in Hill-Rom Medical Equipment?
To resolve the issue of loss of corner steer in your Hill-Rom medical equipment, try tightening the brake/steer link screw. If this doesn't solve the problem, consider replacing the caster.
Why are there reduced pedal pumps on my Hill-Rom P8050?
To address the issue of reduced pedal pumps on your Hill-Rom medical equipment, start by removing air from the hydraulic system. If the head or foot end still doesn't rise, replace the corresponding hydraulic cylinder.
How to fix a push handle malfunction on Hill-Rom P8050 Medical Equipment?
To fix a push handle malfunction on Hill-Rom medical equipment, first remove any interference that may be obstructing it. If the issue persists, consider replacing the push handle latch or the push handles themselves.
What to do if the Hill-Rom Medical Equipment stretcher will not go into neutral position?
If your Hill-Rom medical equipment stretcher will not go into neutral position, check the brake/steer link at the head and foot ends of the stretcher for correct orientation, and adjust if necessary. Also, inspect each caster and replace any that are defective. You may also need to tighten the brake/steer link screw.
What to do if the weight shown on the Hill-Rom P8050 Medical Equipment scale display is not correct?
If the weight shown on the Hill-Rom medical equipment scale display is not correct, ensure all packing materials and shims have been removed before taking a weight reading. Also, verify that the load beam cables are connected in the correct order before taking another reading.
Why is there reduced braking ability in my Hill-Rom P8050?
To address reduced braking ability in your Hill-Rom medical equipment, ensure the brake/steer link adjustment at both ends of the stretcher is correct. If necessary, adjust the brake/steer link. If the issue persists, adjust the caster brake shoes or replace any defective casters.
General| Brand | Hill-Rom |
|---|---|
| Model | P8050 |
| Category | Medical Equipment |
| Language | English |
Provides crucial safety guidelines for operation and maintenance.
Lists common scale display errors and their corresponding solutions.
Details procedures to verify the correct operation of various stretcher functions.
Covers specific function checks for the Procedural Stretcher model.
Details function checks specific to the Electric Stretcher model.
Troubleshooting steps for issues with reduced stretcher braking performance.
Provides guidance for diagnosing and resolving issues where the stretcher will not lower.
Troubleshooting steps for when the stretcher scale display is not functioning.
Provides steps for removing and replacing the siderail on specific stretcher models.
Details the procedure for removing and replacing the siderail on the electric stretcher.
Provides instructions for removing and replacing the control board in the electric stretcher.
Details the procedure for removing and replacing the scale load beam.
Explains the removal, replacement, and adjustment of the active brake system.
To Next Page