19
Operations
5. Replace the Recovery Tank on the machine.
Machine Operation
1. Plug cord into grounded outlet.
NOTE: Be sure dome is seated on recovery tank, and
float shut-off is installed correctly.
2. Adjust brush to proper setting.
NOTE: For good operation the brush must skim the
carpet. If circuit breaker trips raise brush to prevent
damage to motor or carpet.
3. Turn on brush and vacuum motor switches
("ON"="I"). Turn on solution switch for continuous
spray or set switch to intermittent to allow use of
trigger switches.
HIL56085 - Operators Manual - Trident EX8
To Next Page
Loading...
