EasyManuals Logo

Hilti C 4/12-50 Original Operating Instructions

Hilti C 4/12-50
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
8 English 2373346
*2373346*
4 Technical data
4.1 Technical data
C 4/12-50
Weight
0.35 kg
Output voltage
10.8 V
Output power
50 W
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
Before inserting the battery, make sure that the product is switched off.
Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1 Switching the charger on
Plug the supply cord into the power outlet.
LED 1 on the charger shows green.
5.2 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery. page 7
5.3 Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
5.4 Removing the battery
1. Press the battery release button.
2. Remove the battery from the product.

Other manuals for Hilti C 4/12-50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hilti C 4/12-50 and is the answer not in the manual?

Hilti C 4/12-50 Specifications

General IconGeneral
Product typeBattery & charger set
Suitable for-
Input voltage230 V
Product colorBlack, Red
Battery voltage- V
Battery capacity12 Ah
Charging current4 A
Charging voltage12 V
Country of originGermany
Power source typeAC
Brand compatibilityHilti
Number of batteries included1 pc(s)
Number of batteries supported1
LED indicatorsYes
Package depth45 mm
Package width70 mm
Package height37 mm
Package weight300 g
Battery sizeB
Batteries includedNo
Operating temperature (T-T)0 - 60 °C
Number of shipping (inner) cases per master (outer) case15 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth90 mm
Width137 mm
Height60 mm
Battery weight50 g

Related product manuals