Hilti C 4/12-50 Original Operating Instructions

*2373346*
2373346 English 3
1.5 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product
described here complies with the applicable legislation and standards. A
copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-
86916 Kaufering, Germany
2 Safety
2.1 General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all instruc-
tions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
▶ Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
▶ Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
▶ Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
▶ When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.

Hilti C 4/12-50 Specifications

General

Product type	Battery & charger set
Suitable for	-
Input voltage	230 V
Product color	Black, Red
Battery voltage	- V
Battery capacity	12 Ah
Charging current	4 A
Charging voltage	12 V
Country of origin	Germany
Power source type	AC
Brand compatibility	Hilti
Number of batteries included	1 pc(s)
Number of batteries supported	1
LED indicators	Yes
Package depth	45 mm
Package width	70 mm
Package height	37 mm
Package weight	300 g
Battery size	B
Batteries included	No
Operating temperature (T-T)	0 - 60 °C
Number of shipping (inner) cases per master (outer) case	15 pc(s)

Weight and Dimensions

Depth	90 mm
Width	137 mm
Height	60 mm
Battery weight	50 g