15
en
11. EC declaration of conformity
We declare, on our sole responsibility, that this product
complies with the following standards or standardisation
documents: 73/23/EWG, 89/336/EWG, EN 60335-1,
EN 60335-2-29, EN 55014-1, EN 55014-2, EN 61000-
3-2, EN 61000-3-3.
The C 7/36-ACS also complies with the following stan-
dards or standardization documents: 1999/5/EG,
EN 300330, EN 301489.
Designation: Battery charger
Type: C 7/24 or C 7/36-ACS
Year of design: 2003
Hilti Corporation
Ronald Fehlmann Dr. Heinz-Joachim Schneider
BU Leiter Cutting and Sanding BA Leiter Light Duty Systems
April 2003 April 2003
To Previous Page
Loading...
