*2068470*
2068470 English 5
▶ Store laser tools, when not in use, in places to which unauthorized
persons have no access.
2.1.5 Electromagnetic compatibility
Although the device complies with the strict requirements of the applicable
directives, Hilti cannot entirely rule out the possibility of interference to the
device caused by powerful electromagnetic radiation, possibly leading to
incorrect operation. Check the accuracy of the device by taking measure-
ments by other means when working under such conditions or if you are
unsure. Likewise, Hilti cannot rule out the possibility of interference with
other devices (e.g. aircraft navigation equipment). The tool complies with
the requirements of class A; The possibility of interference occurring in a
domestic environment cannot be excluded.
Only for Korea: This laser range meter is suitable for commercial and
industrial use and for the electromagnetic radiation encountered in this field
(Class A). Users must pay attention to this point and make sure that this
laser range meter is not used in occupied living areas.
3 Description
3.1 Overview of the product 1
@
Rear contact surface
;
Reference indicator LED for
rear contact
=
Left arrow button
%
Menu button
&
“Measure” button
(
Graphic display
)
Reference indicator LED for
front contact
+
Side “Measure” button
§
On/off button
/
Right arrow button
:
Hand strap attachment point
∙
Delete (clear) button
$
¹/₄ inch thread
£
Folding spike
|
Laser emitting and receiving
lens
¡
Optical sight
Q
¹/₄ inch thread
3.2 Intended use
The product described is a laser range meter. It is designed for taking indi-
vidual measurements as well as the continuous measurement of distances.
Distances can be measured from all stationary targets without a highly
reflective surface, i.e. concrete, stone, wood, plastic, paper, etc. The use of
prisms or other highly reflective targets is not permissible and, if attempted,
may falsify the results.
The product is approved for use with batteries of the type AAA.
To Next Page
Loading...
