What to do if my Hilti Battery Charger doesn't start?
If your Hilti Battery Charger doesn't start, the battery may be discharged or defective. Try charging the battery, inserting a new one, or connecting the charger to the AC supply. Alternatively, the appliance itself could be defective. Check the battery by pressing the two buttons on its sides. If the LEDs light up, the charger might be faulty; if they don't, the battery is defective.
Why is the battery symbol flashing on my Hilti RC 4/36 Battery Charger?
If the border of the battery symbol flashes and no segment of the state of charge indicator is filled on your Hilti Battery Charger, it could be due to the battery being too hot, too cold, or defective. Allow the battery to cool down or warm up as needed. You can also check the battery by pressing the two buttons on the sides. If the LEDs light up the Radio Charger might be defective. If the LEDs do not light up the battery is defective.
What to do if the battery symbol flashes before my Hilti RC 4/36 Battery Charger switches off?
If the border of the battery symbol flashes and no segment of the state of charge indicator is filled briefly before your Hilti Battery Charger switches off, the battery may be too hot or too cold. In this case, wait until the battery cools down or warms up. Another possibility is that the battery is defective. Check it by pressing the two buttons at the sides. If the LEDs light up the Radio Charger might be defective. If the LEDs do not light up the battery is defective.
General| Brand | Hilti |
|---|---|
| Model | RC 4/36 |
| Category | Battery Charger |
| Language | English |
To Next Page
