Hilti SF 151-A User Manual

1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
Warning: hot
surface
Warning:
caustic
substances
Obligation signs
Wear eye
protection.
Wear a hard
hat.
Wear ear
protection.
Wear
protective
gloves.
Wear
breathing
protection.
Symbols
Read the
operating
instructions
before use.
Return waste
material for
recycling.
Volts Direct current
Nominal speed
under no load
Revolutions
per minute
Hammer
drilling
Drilling
without
hammering
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the SF 151‑Acordless
drill/driver or SFH 151‑A cordless hammer drill/driver
withbatteryfitted,arereferredtoas“thetool”.
Location of identification data on the tool
The type designation can be found on the type plate
and the serial number on the side of the motor
housing. Make a note of this data in your operating
instructions and always refer to it when making an
enquiry to your Hilti representative or service depart-
ment.
Type :
Serial no.:
2. Description
2.1 Use of the product as directed
The SF 151-A is a hand-held, cordless drill/driver for
driving and removing screws and for drilling in steel,
wood and masonry.
The SFH 151-A is a hand-held, cordless hammer
drill/driver for driving and removing screws, for
drilling in steel, wood and masonry and for ham-
mer drilling in concrete and masonry.
Working on materials hazardous to the health (e.g.
asbestos) is not permissible.
Do not use the battery as a power source for other
unspecified appliances.
Changes or modifications to the tool are not permiss-
ible.
To avoid the risk of injury, use only genuine Hilti
accessories and insert tools.
Observe the information printed in the operating in-
structions concerning operation, care and mainten-
ance.
The tool is designed for professional use and may
be operated, serviced and maintained by trained, au-
thorized personnel. This personnel must be informed
of any special hazards that may be encountered. The
tool and its ancillary equipment may present haz-
ards when used incorrectly by untrained personnel or
when used not as directed.
en
14

Hilti SF 151-A Specifications

General

Brand	Hilti
Model	SF 151-A
Category	Drill
Language	English