Hilti SF 151-A User Manual

Tool SF 151-A SFH 151-A
Speedin3rdgear
0to2,000r.p.m.
Torque (driving screw in soft material) set to
drilling symbol
Max. 33 Nm Max. 33 Nm
Torque (driving screw in hard material) set
to drilling symbol
Max. 70 Nm Max. 70 Nm
Torque range (15 settings) 2 to 12 Nm 2 to 12 Nm
Hammering speed 36,000 b.p.m.
Hammer drilling in brick and masonry (max.
length80mm)
Diameter1.5to6mm
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted noise power level for the
SF 151-A
88 dB (A)
Typical A-weighted noise power level for the
SFH 151-A
104 dB (A)
Typical A-weighted noise pressure level for the
SF 151-A
77 dB (A)
Typical A-weighted noise pressure level for the
SFH 151-A. Wear ear protection!
93 dB (A)
Uncertainty for the given noise level as per EN 60745
3dB(A)
Typical weighted vibration at the grips for the
SF 151-A
Max. 2.5 m/s²
Typical weighted vibration at the grips for the
SFH 151-A
10 m/s²
Battery SFB 150 SFB 155
Rated voltage 15.6 V 15.6 V
Capacity
2Ah 3Ah
Energy content 31.2 Wh 46.8 Wh
Weight 0.94 kg 0.96 kg
Temperature monitoring Yes Yes
Type of cell Nickel-cadmium SUB C size Nickel-metal hydride SUB C
size
No. of cells
13 13
5. Safety rules
NOTE
The safety rules in Section 5.1 contain all general
safety rules forpower tools. Theinstructions at 5.1.2a,
5.1.2d, 5.1.2e, 5.1.3c and 5.1.4c are not relevant to
this tool.
5.1 General safety rules
WARNING! Read all instructions! Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term “power tool” in
all of the warnings listed below refers to your mains
operated (corded) power tool or battery operated
(cordless) power tool. SAVE THESE INSTRUCTIONS.
5.1.1 Work a rea
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
en
16

Hilti SF 151-A Specifications

General

Brand	Hilti
Model	SF 151-A
Category	Drill
Language	English