English 9
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
SFC 14A SFC 22A
Sound power level L
WA
80 dB 80 dB
Vibration information
SFC 14A SFC 22A
Screwdriving without hammer action a
h
1 m/s² 1 m/s²
Uncertainty for screwdriving without hammer action (K)
1.5 m/s² 1.5 m/s²
Drilling in metal a
h,D
2 m/s² 2 m/s²
Uncertainty for screwdriving without hammer action
drilling in metal (K)
1.5 m/s² 1.5 m/s²
4.3 Battery
Battery operating voltage
14.4 V
Ambient temperature
−10 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
4.4 Battery
Battery operating voltage
21.6 V
Ambient temperature
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and that the switch safety lock is
activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the drill/driver
are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop out and fall, thereby presenting
a hazard to other persons.
Printed: 11.09.2018 | Doc-Nr: PUB / 5152681 / 000 / 04