Hilti SFE 2-A12 User Manual

*2236949*
2236949 English 9
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
Overloading or overheating are not indicated by the charge status
display.
3.6 Adapter
This product has different adapters for various applications.
The following adapters are available:
Adapter Description
Hex bit holder for bits with mechanical clamping mechanism.
Keyless chuck for sizes in the range:
1.5 mm … 13 mm
(0.06 in … 0.5 in)
Right-angle adapter for working in cramped conditions, with
magnetic hex bit holder.
Combinable with other adapters.
Eccentric adapter for working close to the wall, with magnetic
hex bit holder.
4 Technical data
4.1 SFE 2-A12
Rated voltage
10.8 V
Weight
1.1 kg
(2.4 lb)
Maximum speed 1st gear
400 /min
2nd gear
1,600 /min
Maximum torque
Screwdriving
0.5 Nm … 5 Nm
(0.4 ftlb
f
… 4 ftlb
f
)
Drilling
≤ 21 Nm
(≤ 15 ftlb
f
)
Drill-bit diameter Softwood
1.5 mm … 13 mm
(0.06 in … 0.5 in)
Hardwood
1.5 mm … 10 mm
(0.06 in … 0.4 in)
Metal
1.5 mm … 6 mm
(0.06 in … 0.2 in)

Hilti SFE 2-A12 Specifications

General

Brand	Hilti
Model	SFE 2-A12
Category	Drill
Language	English