Hilti SR 2-A12 Operating Instructions

English 7
3.4 Items supplied
Reciprocating saw, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.group
4 Technical data
4.1 Technical data
SR 2-A12
Rated voltage
10.8 V
Weight in accordance with EPTA procedure 01
1.8 kg
Stroke rate
0 /min … 3,000 /min
Stroke length
16 mm
Keyless chuck for standard accessory tools
1/2 in
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
SR 2-A12
Sound power level (L
WA
)
86 dB
Uncertainty for the sound power level (K
WA
)
3 dB
Sound pressure level (L
pA
)
75 dB
Uncertainty for the sound pressure level (K
pA
)
3 dB
Total vibration
SR 2-A12
Vibration emission value for sawing chipboard (a
h,B
)
5.3 m/s²
Vibration emission value for sawing wooden beams (a
h,WB
)
5.5 m/s²
Uncertainty (K)
1.5 m/s²
4.3 Battery
Battery operating voltage
10.8 V
Ambient temperature for operation
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
Battery charging starting temperature
−10 ℃ … 45 ℃
Printed: 07.01.2019 | Doc-Nr: PUB / 5470139 / 000 / 00

Hilti SR 2-A12 Specifications

General

Voltage	12 V
Weight	1.2 kg
Tool type	Cordless reciprocating saw
Battery Type	Li-ion
Blade Length	150 mm
Stroke rate	3000 strokes/min