Hilti WSR 1400-PE User Manual (English)

Other manuals for Hilti WSR 1400-PE

Questions and Answers:

M
millerericaAug 3, 2025
Why Hilti WSR 1400-PE won't start?
- V
  Vincent ChavezAug 4, 2025
  The Hilti Saw might not start due to a few reasons: * There may be an interruption in the electrical supply. To check this, plug in another power tool or appliance to see if it works. * The supply cord or plug could be defective. If this is the case, have the tool repaired only by a Hilti Service Center. * The control switch might be defective. In this instance, have the tool repaired only by a Hilti Service Center.
V
Victoria OrtizAug 9, 2025
What to do if Hilti Saw does not achieve full power?
- M
  Monica DanielAug 9, 2025
  If the Hilti Saw doesn't achieve full power, consider these possibilities: 1. The extension cord might be too long or have an inadequate gauge. Use only approved extension cords with adequate gauge conductors. 2. The control switch may not be fully pressed. Ensure you press the control switch completely.
S
Suzanne ParkerAug 15, 2025
How to remove saw blade from Hilti WSR 1400-PE Saw chuck?
- A
  adamsernestAug 15, 2025
  If you're having trouble removing the saw blade from the Hilti Saw chuck, it might be because the locking sleeve isn't turned as far as it can go. Turn the locking sleeve completely, and then try removing the saw blade.
S
Sandra GonzalesAug 21, 2025
What to do if contact shoe or pipe-cutting adapter cannot be removed from Hilti Saw?
- U
  ureedAug 21, 2025
  If the contact shoe or pipe-cutting adapter cannot be removed from your Hilti Saw: * It might be prevented by the saw blade. Remove the saw blade first, and then try removing the contact shoe. * The pushbutton may not be pressed in all the way. Ensure you press the pushbutton fully before attempting to remove the saw blade.
T
Tamara SaundersAug 27, 2025
Why orbital-action function does not react in Hilti WSR 1400-PE?
- C
  Carrie JacksonAug 28, 2025
  The orbital-action function might not react because the orbital-action switch is not in the correct position. Move the orbital-action switch to the position for orbital action. Note that orbital action is only perceptible when the saw is cutting.

Hilti WSR 1400-PE Specifications

General

Power	1400 W
No-load speed	2600 strokes per minute
Weight	4.3 kg
Blade diameter	190 mm
Corded/Cordless	Corded
Max. Cutting Depth at 90°	140 mm
Max. Cutting Depth at 45°	100 mm
Cutting depth	140 mm at 90°
Base material	Aluminum