EasyManuals Logo

HIMA HIMatrix F30 User Manual

Default Icon
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
System Manual Compact Systems 2 Safety
HI 800 141 E Rev. 2.02 Page 15 of 110
2.4 ESD Protective Measures
Only personnel with knowledge of ESD protective measures may modify or extend the system
or replace a module.
NOTE
Electrostatic discharge can damage the electronic components within the HIMatrix
systems!
When performing the work, make sure that the workspace is free of static, and wear
an ESD wrist strap.
If not used, ensure that the modules are protected from electrostatic discharge, e.g.,
by storing them in their packaging.
2.5 Residual Risk
No imminent risk results from a HIMatrix compact system itself.
Residual risk may result from:
Faults related to engineering
Faults related to the user program
Faults related to the wiring
2.6 Safety Precautions
Observe all local safety requirements and use the protective equipment required on site.
2.7 Emergency Information
A HIMatrix system is a part of the safety equipment of a plant. If a device or a module fails, the
system enters the safe state.
In case of emergency, no action that may prevent the HIMatrix systems from operating safely is
permitted.

Table of Contents

Other manuals for HIMA HIMatrix F30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIMA HIMatrix F30 and is the answer not in the manual?

HIMA HIMatrix F30 Specifications

General IconGeneral
BrandHIMA
ModelHIMatrix F30
CategoryController
LanguageEnglish

Related product manuals