HI 800 101 HIMatrix Engineering Manual
About this Manual
The safety-related HIMatrix systems as described in this manual can be used for several dif-
ferent purposes. The knowledge of regulations and the technically perfect transfer carried
out by qualified staff are prerequisites for the safe installation, start-up and for the safety dur-
ing operation and maintenance of the HIMatrix Automation Devices.
In case of unqualified interventions into the automation devices, deactivating or bypassing
safety functions, or if advices of this manual are neglected (causing disturbances or impair-
ments of safety functions), severe personal injuries, property or environmental damage may
occur for which HIMA cannot take liability.
HIMatrix Automation Devices are developed, manufactured and tested according to the rele-
vant safety standards. They must only be used for the applications described in the instruc-
tions and with specified environmental conditions, and only in connection with approved ex-
ternal devices.
The HIMatrix system family includes not only a modular controller but also a comprehensive
range of compact small controllers and remote I/O modules. The HIMatrix components are
designed for versatile applications to provide solutions for safety-related tasks.
Intended Readership
This manual is intended for project engineers, programmers and maintenance staff with ge-
neral knowledge in the area of automation devices.
The reproduction of the contents of this publication (either in its entirety or in a part) is not
permitted without the written permission of HIMA.
All rights and technical modifications reserved.
© HIMA Paul Hildebrandt GmbH + Co KG
P. O. Box 1261
D - 68777 Bruehl near Mannheim
Phone +49 6202 709-0
Fax +49 6202 709-107
E-mail info@hima.com
Internet http://www.hima.com
1 of 61
To Next Page
Loading...
Need help?
General
