X-DI 32 02 3 Product Description
HI 801 017 E Rev. 4.00 Page 29 of 56
The system cable is available in three variants, see Table 18.
System cable Description Length
X-CA 002 01 8 8 m
X-CA 002 01 15 15 m
X-CA 002 01 30
Coded cable plugs on both sides
30 m
Table 18: Available System Cables X-CA 002
3.7.2 System Cable X-CA 009
The X-CA 009 system cable is used to connect the X-CB 005 05 connector board to the
field zone via field termination assembly.
General
Cable LIYCY-TP 58 x 2 x 0.14 mm²
Wire Finely stranded
Average outer diameter (d) approx. 18.3 mm
Minimum bending radius
Fixed laying
Flexible application
5 x d
10 x d
Combustion behavior
Flame resistant and self-extinguishing in
accordance with IEC 60332-1-2, -2-2
Length 8…30 m
Color coding Based on DIN 47100, see Table 16.
Table 19: Cable Data X-CA 009
The system cable is available in three variants, see table:
System Cable Description Length
X-CA 009 01 8 8 m
X-CA 009 01 15 15 m
X-CA 009 01 30
Coded cable plugs on both sides
30 m
Table 20: Available System Cables X-CA 009
3.7.3 Cable Plug Coding
The cable plugs are equipped with three coding pins. Cable plugs only match connector
boards and FTAs with the corresponding recesses, see
Figure 7.
To Next Page
Loading...
