Click on “ ” or “ ” to change the assist level. The default gears of the display
instrument are Gear 0-5, with Gear 0 with no power output, Gear 1 with the minimum
power output and Gear 5 with the maximum power output.The default assist Level is
Gear 1 when the display is powered on.
◆ Assist Level Selection
Assist Level Selection
When the battery is fully charged, all five segments of the LCD are illuminated. When the
battery is under voltage, the displayed battery outer frame flashes indicating the need for
immediate charging.
◆ Battery Level Display
Battery Level Display UIs
Motor output power can be known through the display. See the indication shown in the
following figure.
Display UI for Motor Output Power
◆ Motor power indication (uploaded power with protocol support or
real-time operating current and voltage)
When an error occurs in the controller, the display will show an error code. Please check
the Attached Table 1 for the error code definition.
When an error code is demonstrated, please make troubleshoot in a timely manner, or
else the E-bike potentially causes danger.
◆ Error Code Display
Error Code Display UI
16
To Next Page
Loading...
